Automatically switch to connected External Display on Boot with XRandR

Diposkan oleh Unknown on Wednesday, March 11, 2009

I bought a notebook to be flexible, but when at home I use it with external monitor, keyboard and mouse to be comfortable. Now the problem was that I couldn't tell Ubuntu I want to only use the external monitor - if it's available.

Well, I've written a one-liner that fixes that problem. If the external display is attached, it will automatically switch over to it and display the internal display. Otherwise it boots normally (leaving the internal display enabled).

I put the script into the Xsession.d directory so it gets started for every user on boot: /etc/X11/Xsession.d/98vgaonly and made it executable.

The actual script line is this:
xrandr -q | grep 'VGA connected' && xrandr --output LVDS --off --output VGA --auto
It checks if the line 'VGA connected' was found in xrandr's query and then asks your X server to turn off the internal output and use the external one with automatic resolution detection.

So to automatically switch to a connected VGA during boot just execute:
echo 'xrandr -q | grep \'VGA connected\' && xrandr --output LVDS --off --output VGA --auto' | sudo tee /etc/X11/Xsession.d/98vgaonly && sudo chmod a+x /etc/X11/Xsession.d/98vgaonly


You may have to change the name of the outputs for your setup. xrandr -q will let you know what's available. It would probably be possible to somehow call this script automatically when plugging in a monitor, but I've not figured out how. xrandr only works when called from inside the running X session in my experience.


If you want to know more about XRandR, check this recent article.

Any comments are welcome!

{ 0 komentar... read them below or add one }

Post a Comment

Come on share your comment, but please do not spam